Proper assessment of the substrate is essential. The surface must be clean, dry, sound, and free from grease or contaminants. Before application, thoroughly stir the product, as matting agents may settle.
Apply Recoat Façade using a microfiber roller with a pile length of 8–9 mm. Do not use fleece or synthetic rollers and avoid applying thick layers. For untreated, highly absorbent, or weathered substrates, pre-treat with Recoat Impregnate to ensure optimal adhesion and durability.
Apply the finishing coat diluted 5–10% and aim for an even, correct layer thickness. As a guideline, one 4-litre container should cover approximately 60–80 m². Significantly lower coverage indicates over-application.
Never apply Recoat coatings undiluted. Always create a test area before full application. Avoid painting in direct sunlight whenever possible. Plaster surfaces and repair mortars must always be pre-treated with Recoat Impregnate. After cleaning a substrate, apply the coating immediately once the surface is dry.
For best results and an optimal aesthetic finish, we recommend using rollers approved by the manufacturer.
Recoat Façade is a durable, water-based, matte exterior coating that protects and extends the lifespan of façades. It is water- and dirt-repellent, easy to clean, and breathable, allowing moisture to escape while preventing water ingress. Suitable for a wide range of mineral substrates, Recoat Façade provides long-lasting protection against weathering, UV exposure, salts, and chemicals, while reducing maintenance requirements.
| Location | Inside, Outside |
|---|---|
| Surface | Plasterwork |
| Special features | Easy to clean, Moisture regulating |
| Finishing | Matt |
SDS - EN - Recoat - Façade