Recoat – Floor One

  • Very high-quality water-based, matte, clear 1k coating for inside and outside
  • Excellent unique anti-slip properties
  • Restoring color and surface
  • Excellent adhesion
  • High efficiency
  • Strong dirt and water-repellent
  • Easy and pleasant to process
  • Very good chemical, UV A and UV B-resistant
  • Extremely durable
SKU: 65141 Category:


The Recoat Floor has been specially developed for the maintenance of different types of floors. It is a matte, transparent coating. The Recoat Floor is a floor coating with anti-slip without making the floor rough. This keeps the floor easy to clean. The anti-slip effect comes into effect when the floor gets wet.

The floor coating is odor poor, which prevents nuisance for local residents.

This floor coating from Recoat is highly dirt and water-repellent. In addition, this coating is UV A and UV B-resistant which means that weathering due to weather influences is prevented. Floors are not only restored but also permanently protected against dirt, water and weathering. Due to this floors stay clean for a longer time and they retain their original state. This makes replacement and frequent maintenance unnecessary.

The floor coating adheres excellent and is easy to apply. After 1 to 2 hours the treated floor will be walkable again and after half an hour the surface is already resistant to rain. It is a financially attractive and sustainable alternative for maintaining floors. You will save a lot of management and maintenance costs when floors are treated with the Recoat Floor. Next to cost savings, it is also an environmentally friendly solution. Attractive because the coatings of Recoat contain extremely little solvent and are water-borne. An attractive solution for many sectors such as infrastructure, civil engineering and real estate.

Application area

The Recoat Floor can be applied both indoors and outdoors on various surfaces. It can be applied to concrete surfaces, many types of natural stone, steel treads, marmoleum, PVC floors and floor coatings from other manufacturers.

Advice to always make a test surface.

Additional information




Clear waterborne coating on acrylate dispersions basis




Approx. 15 m2 – 20 m2 / liter The output depends on the application method, roughness, structure and porosity of the substrate.

Gloss strength

Matt 5 GU

Relative humidity

A maximum of 80%

Application temperature

10 – 30 °C

Application by means of

Brush, Microfibre roller 8-9 mm

VOC content

30 g/L. The product is suitable for indoor and outdoor use. EU limit for this product (catA/d): 140 g/L

Approximate specific density

1,26 KG/l

Volume fixed percentage


Outdoor durability

8 to 10 year durability, provided that application is carried out in accordance with regulations and depending on the condition of the substrate, location and use, as well as normal maintenance.

Drying at 20 °C

Dust dry after 20 min, Thumb-tight after 1 hours, Dry to recoat after 2 hours


Wear gloves and ensure sufficient ventilation

Cleaning materials

PH-neutral detergents, Recoat Cleaner, Water


Temperature during storage, transport and application minimum 5° C and maximum 30°C at a relative humidity of Maximum 85%


Water 10% – 20%

Storage stability

A maximum of 24 months in case of dry storage and a temperature of 5°C to 30°C.


SDS - EU - Recoat - Floor One
TDS - EN - Recoat - Floor One


Tests Recoat Floor One

Contact Recoat

    Leave your question and our sales team will contact you shortly.