Recoat – Multi Primer

  • Premium-grade clear 1k water-based primer for indoors and outdoors
  • Extremely good adhesion on virtually all substrates
  • Simply clean the substrate; sanding is not necessary
  • Very high yield
  • Can be topped with almost any type of paint
  • Adhesion primer and primer at the same time
  • Very good coverage
  • Blank or color

Recoat Multi Primer Clear is a extremely durable, waterborne, universal, clear, semi gloss primer which is suitable for various substrates, both indoor and outdoor. Recoat Multi Primer Clear can be used as bonding primer, saturation primer, cosmetic primer (to provide colour) and anticorrosive primer. 

This 1k primer provides excellent adhesion an anticorrosive properties and has a very high favourable yield. Recoat Multiprimer Clear is very scratch and wear-resistant and has a very high spreadability. Sanding the primer before applying the other coatings is not required and can be painted over after 1-2 hours with almost any type of paint and / or coating. Under normal circumstances, the applied layer is rainproof after 30 minutes.

Due to the rapid drying of Recoat products, multiple layers can be applied in one day. The coating can be painted over with other Recoat products without sanding.

Application area

Recoat Multi Primer Clear can be applied as a primer on all types of (prefabricated) concrete, wood (interior) plastics. Hard- and soft floors (linoleum and marmoleum), metals, glass and ceramics. As a bonding primer the Multi Primer can be applied to a wide variety of substrates such as most plastics, all metals, glass and ceramic surfaces. 

Assessment of the surface is very important. The surface must clean, dry and free of grease, oil and other contaminants.

– First clean prefab concrete with the Recoat Etching Cleaner (see-TDS).
For untreated and highly absorbent substrates depending on the suction, dilute the primer strongly (20-50%) with water.

– First clean ceramic surfaces with a sanding cloth in combination with the Recoat Bonding Cleaner (see TDS).

– First clean plastic surfaces with a sanding cloth in combination with the Recoat Cleaner.

– Metal (closed) surfaces first clean a sanding cloth in combination with the Recoat Bonding Cleaner (see TDS).

– Other surfaces first clean a sanding cloth in combination with the Recoat Cleaner.

Recoat Multi Primer reduces consumption and ensures optimum performance of the end product. Apply product as a “normal” waterborne paint; applying, distributing and holding off. Avoid working in the sun because of too fast drying.

Never apply Recoat products undiluted.

Advice to always make a test surface.

Additional information

Volume

,

Base

Water and solvent solution with adhesion promoter

Colour

Colourless

Output

Approx. 15 m2 – 20 m2 / liter The output depends on the application method, roughness, structure and porosity of the substrate.

Gloss strength

Semi Gloss GU

Relative humidity

A maximum of 80%

Application temperature

10 – 30 °C

Application by means of

Brush, Felt roller, Microfibre roller 8-9 mm

VOC content

14 g/L. The product is suitable for indoor and outdoor use. EU limit for this product: 140 g/L.

Approximate specific density

1,09 KG/l

Volume fixed percentage

43%

Drying at 20 °C

Dust dry after 20 min, Dry to recoat after 2 hours

Application

Wear gloves and ensure sufficient ventilation

Cleaning materials

Recoat Cleaner, Water

Transport

Temperature during storage, transport and application minimum 5° C and maximum 30°C at a relative humidity of Maximum 85%

Thinning

Water 10- 20 % as a primer 20% to a maximum of 50% as a saturation primer

Storage stability

A maximum of 24 months in case of dry storage and a temperature of 5°C to 30°C.