Recoat- Multi Primer Plus

  • High-quality water-based 2-component clear primer.
  • For pre-treating mechanically heavily used substrates.
  • For indoor and outdoor use.
  • Very durable and wear-resistant.
  • Overcoatable within a few hours with virtually any type of paint.
  • Extremely good adhesion on almost all substrates.
  • No need to clean the substrate with a sanding pad, blasting, or diamond grinding.
  • Very high efficiency.
  • Strongly rust-resistant and moisture-resistant.
SKU: 53832 Category:


Multi Primer Plus is a 2k highly durable, water-based, universal, clear, adhesion primer and/or sealer. It is specially designed for substrates where extreme situations are applicable.

Recoat Multi Primer Plus is suitable for almost all substrates, both indoors and outdoors. This 2k primer has excellent adhesion, flow, rust-resistant properties, is highly scratch and wear-resistant, and has a very high spreading capacity.

Under normal conditions, the applied layer is rain-resistant after just 2 hours.

Due to the fast drying of Recoat products, multiple layers can be applied in one day. The coating can be painted over with other Recoat products within 24 hours without the need for sanding.

Application area

Recoat Multi Primer Plus is specially developed for surfaces that are heavily loaded, such as warehouses, laboratories, and outdoor areas (not resistant to rising ground moisture).

The Multi Primer Plus is specially developed to be finished with Floor 2K.

This system provides an extremely strong protective layer that is highly chemical-resistant. Because this system can withstand many chemicals and alcohol-containing cleaning agents, it is extremely suitable for use in healthcare.

Additional information



Mixed volume




Mix ratio

1 : 1 (Recoat base : Recoat hardener). Stir base mechanical before adding hardener for 1 minute. Mix base and hardener mechanical (min 3 min.) without adding water. Then add 20% water and mix again for 3 minutes.


Approx. 15 m2 – 20 m2 / liter Is practical per litre of applied product. The output depends on the application method, roughness, structure and porosity of the substrate.

Gloss strength

Semi Gloss GU

Relative humidity

A maximum of 80%

Application temperature

10 – 30 °C

Application by means of

Brush, Felt roller, Microfibre roller 8-9 mm

Volume fixed percentage


Drying at 20 °C

Dust dry after 20 min, Dry to recoat after 2 hours


Wear gloves and ensure sufficient ventilation

Cleaning materials

Recoat Cleaner, Water


Temperature during storage, transport and application minimum 5° C and maximum 30°C at a relative humidity of Maximum 85%


Water 10- 20 % as a primer 20% to a maximum of 50% as a saturation primer

Storage stability

A maximum of 24 months in case of dry storage and a temperature of 5°C to 30°C., Hardener for a maximum of 12 months in case of dry storage and a temperature of 5°C to 30°C


SDS - EU - Recoat- Multi Primer Plus
TDS - EN - Recoat- Multi Primer Plus

Contact Recoat

    Leave your question and our sales team will contact you shortly.