Recoat – Wall sealer

  • Premium grade clear 1k water-based matte coating for indoors
  • Extremely good adhesion on virtually all substrates
  • Simply clean the substrate
  • Very high yield
  • Even better cleanable than schrubbing class 1
  • Extremely matte so that retouching is hardly visible
SKU: 78251 Category:

Description

Recoat Wall sealer is a clear, waterborne, matt coating which is suitable for various indoor substrates. The coating is extremely easy to clean.
Recoat Wall sealer provides excellent adhesion and will form a permanent, transparent, protective layer with a high surface tension. The Wall sealer thereby protects walls from dirt adhesion and, as such, is very easy to clean. In addition, the coating is highly resistant to chemicals.

The Wall Sealer can be used on all kinds of substrates, wall paint, wallpaper, plaster, etc.

After application, a permanent, transparent protective layer with a high surface tension is created.

This protects the coating against dirt adhesion, skin fats and is therefore very easy to clean. The coating is also highly chemical resistant. Due to the rapid drying of Recoat products, several layers can be put in a day. The coating can be painted over with other Recoat products without sanding.

Application area

Recoat Wall sealer can be applied to various substrates in sectors where hygiene is important, such as health care and the food industry. But also for public areas that get polluted quickly.

Recoat. Recoat Wall Sealer is not suitable for rough surfaces. The advice is to always put a test on the relevant surface first.

Additional information

Volume

10 LITER

Base

Clear waterborne coating on acrylate basis

Colour

Colourless

Output

Approx. 15 m2 – 20 m2 / liter is practical per litre of applied product. The output depends on the application method, roughness, structure and porosity of the substrate.

Gloss strength

Matt GU

Relative humidity

A maximum of 80%

Application temperature

10 – 30 °C

Application by means of

Brush, Microfibre roller

Approximate specific density

1,19 KG/l

Volume fixed percentage

44%

Drying at 20 °C

Cleanable after 5 days, Dust dry after 20 min, Thumb-tight after 2 hours

Application

Wear gloves and ensure sufficient ventilation

Hardening

Minimum 7 days at a constant temperature of 20 °C. Full load can take longer due to varying temperatures.

Cleaning materials

Recoat Cleaner, Water

Transport

Temperature during storage, transport and application minimum 5° C and maximum 30°C at a relative humidity of Maximum 85%

Thinning

Water maximum of 5-10%

Storage stability

A maximum of 24 months in case of dry storage and a temperature of 5°C to 30°C.

SDS - TDS

SDS - EU - Recoat - Wall sealer
TDS - EN - Recoat - Wall sealer

Tests

Warrington Fire test report Wall Sealer

You may also like…

Contact Recoat

    Leave your question and our sales team will contact you shortly.